Barco R9806700 - Manual (Page 81)

15. Image Alignment
15.2.2.2 Decoding standard EBU – IRE
About decoding
NTSC video inputs signals can be decoded via he default American IRE standard or via the European EBU standard. Decoding a
NTSC video signal using the EBU standard may result in a greenish tint.
How to set up the decoding standard
1. From the Picture tuning menu, select item DECODING. (menu 15-7)
The decoding standard, indicated between brackets, can be chosen.
2. Press ENTER or selection wheel to toggle the decoding standard to EBU (European standard) or to IRE (American standard) ,
depending the selected input source.
3. Press EXIT (RCU) or select item RETURN (ACSAR) to return.
PICTURE TUNING
CTI [ON]*
COLOR TEMPERATURE*
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH*
NOISE REDUCTION
INPUT BALANCE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
0HQX 
15.2.2.3 Noise reduction
About Noise reduction
Adjusting the noise reduction level results in a less noise and pixel jitter in all video and data sources.
How to adjust the Noise reduction
1. From the Picture tuning menu, select item NOISE REDUCTION. (menu 15-8)
The Noise reduction bar scale appears on-screen and in the graphical display. The Noise reduction level is adjustable in 7 steps.
(image 15-1)
2. Press cursor key ← ,→ (RCU) or rotate selection wheel to the left or to the right for optimal image display.
3. Press EXIT or selection wheel to return.
PICTURE TUNING
CTI [ON]*
COLOR TEMPERATURE*
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH*
NOISE REDUCTION
INPUT BALANCE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
0HQX 
R5976519 ACSAR 12122002 77