Barco R9806700 - Manual (Page 83)

15. Image Alignment
Image 15-2
Gamma adjustment
15.2.2.5 Input Balance (ONLY APPLICABLE on RGB/YUV input signals)
About Input Balance
Due to the signal distribution or the signal transmissions, a color imbalance can occurs. To allow the customer to be able to correct
the imbalance per file, the alignment ’Input Balance’, situated in the menu Picture Tuning, has been provided.
Observe the image on color dominance in the black and white areas of the displayed picture. If color dominance has been observed
in one of the areas or in both, then proceed to the corresponding input balance adjustment.
Adjust the Color Saturation level to zero before starting the Input Balance adjustment.
R5976519 ACSAR 12122002 79