Opticon PHL 8000 User Manual
Page 113
Advertising
Opticon
PHL 8000 series
User Manual
113
4.
The phone icon will turn to Enabled mode.
5. You will be prompted wether you want to “Dial-up to GPRS”.
• If you select “Yes”, the device will attempt to connect with the current GPRS
settings. You can set the settings by selecting Start -> Settings -> Network
and Dial-up -> GPRS connection. (The dial-up setting might differ depending
on the mobile network operator. Contact you operator for correct settings.)
• If you select “No”, GPRS module will be enabled, but no connection to a
network is established.
Advertising