Opticon PHL 8000 User Manual
Page 26
Advertising
Opticon
PHL 8000 series
User Manual
26
d) Replace the battery cover
Replace the battery cover by inserting the top first, and then press the bottom
in firmly. Turn the locking screws (right and left) upwards to secure the cover
to the PDT.
Figure 2-10: Replace the battery
cover.
2.2.2.
Charging the Battery Pack Using the Power Adapter
1. Connect the power cord to the power adapter.
2. Plug in the connector of the power adapter.
3. Connect the power cord to a power source.
Figure 2-11: Charging using the power adapter
Advertising