Opticon PHL 8000 - Manual (Page 78)

Opticon
PHL 8000 series
User Manual
78
3.2.13. Power
Table 3-28. Power Properties
Icon Item & Function
Battery Tab
• Provide change level indicators for Main battery and
Backup battery.
• Provide remaining power capacity of main battery.
• If
a Main Batteries Very Low warning message shows, the
remaining battery life is about 30 minutes before the PHL
8100 shuts down. (See Figure 3-84: Power Properties:
Battery.)
• To exit the Battery control panel, tap OK from the
command bar, or tap the <Enter> key on the keypad.
Schemes Tab
• The
Schemes Tab allows you to determine the time to
Switch state to Suspend mode when using either Battery
Power or AC Power.
• Select Battery Power or AC Power as the power scheme
from the pull-down list.
• Select the time to suspend mode from the pull-down list.
(See Figure 3-86: Power Properties: Switch state to
Suspend.)
Device Status Tab
• Provide power level of device—The power level ranges from
High (D0), which means the device is at the highest power
level, to Off (D4), which means the device is at the lowest
power level.
NOTES:
• This icon inside the Task bar shows that the AC adapter
is providing power to the PDT.
• This icon inside the Task bar shows that Main Batteries
are providing the power to the PDT.
• This icon inside the Task bar shows that the AC adapter
is providing the power to the PDT and is charging the main
batteries.