Opticon PHL 8000 - Manual (Page 27)

Opticon
PHL 8000 series
User Manual
27
2.2.3. Charging the Battery Pack with Single Dock
a) Leave the battery pack inside the PDT
1. Connect the power cord to the power adapter.
2. Connect the power cord to a power source.
3. Plug in the connector of the power adapter with Single Dock.
4. Insert the PDT into the Single Dock.
Figure 2-12: Charging with Single Dock
b) Place the spare battery pack into the single cradle’s spare battery
charging slot
1. Connect the power cord to the power adapter.
2. Connect the power cord to a power source.
3. Plug in the connector of the power adapter with single cradle.
4. Insert the battery pack into the single cradle’s spare battery slot.