Opticon PHL 8000 - Manual (Page 13)

Opticon
PHL 8000 series
User Manual
13
operation. Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007.
Important note: Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF
exposure compliance. To maintain compliance with FCC RF exposure compliance
requirements, please follow the operating instructions as documented in this manual.
This transmitter must not be co-located or operated in conjunction with any other antenna
or transmitter.
The availability of some specific channels and/or operational frequency bands are
country dependent and are firmware programmed at the factory to match the intended
destination. The firmware setting is not accessible by the end user.
1.5.1. LED and Laser Safety Information
• Class II LED/laser product
• Do not stare at the LED/laser or shine into eyes
• Do not allow young children to use the product without adult supervision
• Do not replace/repair the LED/laser; these are not user replaceable
• Do not shine the LED/laser on a reflective surface
1.6. Recycling & Disposal
Do not dispose of this product in household trash. For proper end-of-life
treatment consult the Environmental Care section of www.opticon.com.
1.7. Regulatory Information
For CE, FCC, RoHS, and other Document of Conformities information, consult
the Regulatory section of www.opticon.com.