RKI Instruments 12 VDC Beacon 200 - Manual (Page 25)

12 VDC Beacon 200 Operator’s Manual • 21
Chapter 4: Operation
Overview
This chapter describes the 12 VDC Beacon 200 in normal operation. This
chapter also describes the 12 VDC Beacon 200 in alarm 1, alarm 2, and fail
conditions and suggests response to these conditions.
Normal Operation
Normal operation is defined as follows:
• The start-up procedure is complete.
• The 12 VDC Beacon 200 is not indicating an alarm 1, alarm 2, or fail
condition.
• The 12 VDC Beacon 200 is not running the Channel Control & Setup or
Calibration Programs.
During normal operation, the 12 VDC Beacon 200 simultaneously displays
the current gas reading, unit of measure, and target gas for each active
channel.
The PILOT light is on during normal operation indicating that the 12 VDC
Beacon 200 is receiving incoming power.
1
2 0
2 0 . 9
% L E
%
C H 4
O x y
L :
:
g e n