RKI Instruments Beacon 200 RIg Monitor, H2S/H2S - Manual (Page 25)

Beacon 200 Rig Monitor Operator’s Manual • 20
Chapter 4: Operation
Overview
This chapter describes the Beacon 200 Rig Monitor in normal operation.
This chapter also describes the Rig Monitor in alarm 1, alarm 2, and fail
conditions and suggests response to these conditions.
Normal Operation
Normal operation is defined as follows:
• The start-up procedure is complete.
• The Rig Monitor is not indicating an alarm 1, alarm 2, or fail condition.
• The Rig Monitor is not running the Channel Control & Setup or
Calibration Programs.
During normal operation, the Rig Monitor simultaneously displays the
current gas reading, unit of measure, and target gas for each active
channel.
The PILOT light is on during normal operation indicating that the Rig
Monitor is receiving incoming power.
1: 0 ppm H2S
2: 0 ppm H2S