RKI Instruments M2 Rig Monitor - Manual (Page 16)

11 M2 Rig Monitor Operator’s Manual
• Are the display screen and status lights on the Rig Monitor visible?
2. At the monitoring site, use #10 screws through the Rig Monitor junction box’s two
mounting holes to secure the junction box to a vertical surface. Figure 7 shows the
outline and mounting dimensions for the Rig Monitor. Hang the H
2
S detector junction
box using the mounting bracket. Ensure that the detector is facing down.
Figure 7: H
2
S Junction Box Outline & Mounting Dimensions
Detector
Cable
12 VDC
Battery
Cable
To Bottom
Cable
Bushing
To Left
Cable
Bushing
1.50
.75
Ø .75
14.87 Max