RKI Instruments GD-K71D - Manual (Page 31)

PT2E-1052
30
５−６．How to finish operation
When finish this operation, turn off power switch of this unit and turn off the main
power(DC24V).
WARNING
・When finish this operation, do it after making point skip with the upper system
(Centralized system).
・ When finish this operation, check the external output and function of outer
equipment to be connected with external alarm contact. Then, judge whether
power can be shut off or not.
・When alarm contact is set on energized condition(optional), alarm contact works
when power supply(DC24V) to this unit is OFF.
In case of energized alarm contact, only power switch of this unit shall be put
OFF.
・In case of detecting high adsorptive gases, turn off the power after making cleaning
enough by fresh air.