Rockwell Automation 20-COMM-M Modbus/TCP Adapter - Manual (Page 66)

6-6 Viewing the Adapter’s Web Pages
20-COMM-M Modbus/TCP Adapter User Manual
Publication 20COMM-UM014C-EN-P
Configure E-mail
Notification Web Page The Configure E-mail Notification web page contains selections and data
fields for configuring the adapter to automatically send e-mail messages to
desired addresses when selected types of events occur.
By default, settings are not protected. After configuration, settings can be
protected by using Parameter 37 - [Web Features] to set E-mail Cfg Bit 0
value to “0” (Disabled). To change a protected configuration, it must first be
unprotected by setting the E-mail Cfg Bit 0 value back to “1” (Enabled).
Figure 6.4 Example of Configure E-mail Notification Web Page
Configuring E-mail Notification
1. Click the desired “Send an e-mail message when…” check boxes you
want to occur that will send e-mail notification. If you only want e-mail
notification when selected faults/alarms occur:
A. Click the respective fault and/or alarm radio buttons.
B. Click the “selected faults” link and/or “selected alarms” link.
Figure 6.5 shows an example faults configuration page.