Rockwell Automation 20-COMM-M Modbus/TCP Adapter - Manual (Page 68)

6-8 Viewing the Adapter’s Web Pages
20-COMM-M Modbus/TCP Adapter User Manual
Publication 20COMM-UM014C-EN-P
Figure 6.6 DOS Window Showing E-mail Server IP Address
The IP address shown in the DOS window (for this example,
131.200.78.4) should be typed into the E-mail Notification Web
Page shown in
Figure 6.4 .
3. Click Save changes.
Important: After configuring E-mail Notification, it is recommended to
protect the settings. Otherwise the configuration can be
changed anytime the web page is accessed with a browser. To
protect the settings, use Parameter 37 - [Web Features] to set
E-mail Cfg Bit 0 value to “0” (Disabled).
Figure 6.7 shows an example e-mail message automatically sent by the
adapter in response to selected events.
Figure 6.7 Example of E-mail Message Sent by Adapter
TIP: To stop e-mail messages, uncheck all of the “Send an e-mail message
when…” boxes.
Disabling the adapter web pages by setting the Web Pages Switch (SW2 in
Figure 2.1 ) to the “Disable Web” position will NOT stop the adapter from
sending e-mail messages.