Rockwell Automation 20-COMM-M Modbus/TCP Adapter - Manual (Page 95)

Index-3
20-COMM-M Modbus/TCP Adapter User Manual
Publication 20COMM-UM014C-EN-P
L
LCD HIM, 3-2
LED HIM, 3-2
LEDs, see status indicators
Logic Command/Reference - setting, 4-4
Logic Command/Status
bit definitions for
PowerFlex 70/700/700H drives, C-1
PowerFlex 700S drives, C-3
definition, G-5
Logic Status/Feedback - reading, 4-7
M
MAC address, see hardware address
manual
conventions, P-2
related documentation, P-1
web site, P-1
mechanical dimensions, A-1
MOD status indicator
locating, 1-6
troubleshooting with, 5-2
Modbus/TCP
accessing device parameters, 4-9
data rates, A-1
data transfers, 4-1 to 4-12
network definition, G-5
supported Function Codes, 4-2
supported registers, 4-15
understanding, 4-1
using the I/O, 4-3 to 4-8
Modbus/TCP Port parameter, B-2
mounting the adapter, 2-5
Msg I/O Timer parameter, B-3
N
NET A status indicator
locating, 1-6
troubleshooting with, 5-3
NET B status indicator
locating, 1-6
troubleshooting with, 5-3
network cable, 2-6
network IDs, G-4
Non-Volatile Storage (NVS)
definition, G-5
in adapter, 3-1
P
parameters
accessing, 3-1
convention, P-2
list of, B-1 to B-5
numbering scheme, B-1
restoring to factory-default settings, 3-12
PCCC (Programmable Controller
Communications Command), G-5
Peripheral Status Register, 4-4
ping, G-5
PORT status indicator
locating, 1-6
troubleshooting with, 5-2
power consumption, A-1
PowerFlex drives
compatible with adapter, 1-2
definition, G-5
HIM, 3-2
installing adapter on, 2-3
preparing for an installation, 2-1
processor, see controller
programmable logic controller, see controller
Q
quick start, 1-5
R
Ref/Fdbk Size parameter, B-3
Reference/Feedback, G-6
regulatory compliance, A-2
related documentation, P-1
Reset Module parameter, B-3
ribbon cable, see Internal Interface cable
S
safety precautions, 1-3
specifications
adapter, A-1
EtherNet/IP subnet mask, G-6