Rockwell Automation 20B PowerFlex 700 Drive Components Replacement - Frame 8 - Manual (Page 45)

Rockwell Automation Publication 20B-IN024C-EN-P - June 2012 45
Component Replacement Procedures Chapter 3
Bus Capacitor See Chapter 1 - Component Diagrams and Torque Specifications to locate the
component detailed in these instructions.
Remove Components
1. Read and follow the
Safety Precautions on page 12 and Important Initial
Steps on page 13 .
2. Remove the transitional busbar assembly as detailed on page 28 .
3. Label and remove all wires and connectors from the bus capacitor busbar.
4. Remove nuts and washers (18 each) fastening the bus capacitor busbar to
the capacitors.
5. Remove the bus capacitor busbar.
6. Remove the capacitors.
Bus Capacitor Busbar
Transitional Busbar
Assembly Removed
Bus Capacitor Busbar
Nuts and Washers (18 each)