Rockwell Automation 20B PowerFlex 700 Drive Components Replacement - Frame 8 - Manual (Page 64)

64 Rockwell Automation Publication 20B-IN024C-EN-P - June 2012
Chapter 3 Component Replacement Procedures
Do not disconnect the U, V, or W busbars at the bottom.
5. Disconnect all busbars where they connect to the converter SCR modules
with 16 mm bolts. Disconnect wiring.
Do not disconnect the U, V, or W busbars at the bottom.
17 mm bolt on
DC– Busbar
17 mm bolt on
DC+ Busbar
Do not
disconnect
Busbars at
the bottom.
AC Drive Shown
16 mm bolts
Do not
disconnect
Busbars at
the bottom.
AC Drive Shown