Rockwell Automation 20B PowerFlex 700 Drive Components Replacement - Frame 8 - Manual (Page 47)

Rockwell Automation Publication 20B-IN024C-EN-P - June 2012 47
Component Replacement Procedures Chapter 3
Capacitor Bank Fan See Chapter 1 - Component Diagrams and Torque Specifications to locate the
component detailed in these instructions.
Remove Components
1. Read and follow the
Safety Precautions on page 12 and Important Initial
Steps on page 13 .
2. Remove the stacking panel as detailed on
page 26 .
3. Label and disconnect all wires for the fan.
4. Remove the four mounting screws.
5. Remove the fan assembly.
Install Components
1. Install the new fan assembly. Torque the four mounting screws to 1.8 N•m
(16 lb•in).
2. Connect the wires.
3. Install the stacking panel as detailed on
page 27 .
4. Replace all safety shields and enclosure covers before applying power to the
drive.
Four Mounting Screw