Rockwell Automation 20B PowerFlex 700 Drive Components Replacement - Frame 8 - Manual (Page 9)

Rockwell Automation Publication 20B-IN024C-EN-P - June 2012
9
Preface
Introduction This publication provides guidelines for replacing the major components in the
PowerFlex® 700 Frame 8 drive.
Component Kits All kits include necessary components, ESD wrist strap and hardware (if
required), and thermal grease (if required).
Description Kit Catalog No. Notes
Printed Circuit Boards
Gate Interface Board
SK-G1-GDB1-F8910 Drive requires three kits
Precharge Board SK-G9-PRE1-V480 AC input
1336-PB-SP22C DC input
Power Interface Board SK-G9-GDB1-D365 365A drives
SK-G9-GDB1-D415 415A drives
SK-G9-GDB1-D481 481A drives
SK-G9-GDB1-D535 535A drives
SK-G9-GDB1-D600 600A drives
Main Control Board SK-G9-VMCB1-D0 115V I/O
SK-G9-VMCB1-C0 24V I/O
T-Comm Board SK-G9-TCOMM
Switch Mode Power Supply Board SK-G9-PWRS1-D0
DC Bus Filter Board
2364-SPP02A
Fans and Main Fan Circuit Components
Heatsink Fan
SK-G1-FAN1-F810 Includes fan and fan enclosure.
Capacitor Fan SK-G1-FAN2-F8910
Power Module Sub-assemblies
Inverter Power Module (IGBT)
SK-G1-QOUT1-F8 Includes:
•
One IGBT module
• One gate interface board
•
Gate interconnect harness
•
Six flexible capacitor busbars
•
Three snubber capacitors
•
One tie down capacitor mount
Drive requires three kits.
Converter Power Module (SCR) SK-G1-SCR1-F89 AC input.
Kit includes three SCR modules.
SCR Snubber Kit SK-G1-SCRSNUBRB AC input drive requires three kits.
DC Precharge SCR Module SK-G1-SCR2-F89 DC input.
Includes:
•
One SCR module
• One diode
Miscellaneous
Current Transducer
SK-G1-CT1-F8 Includes one transducer.
Drive requires three kits.
Thermal Sensor Kit SK-G1-THM1-F89 AC input.
Includes:
•
Main control panel thermal sensor
•
Heatsink thermal sensor
SK-G1-THM2-F89 DC input.
Includes:
•
Main control panel thermal sensor
•
Heatsink thermal sensor