Rockwell Automation 160-DN2 160-DN2 DeviceNet Communication Module FRN 3.xx - Manual (Page 53)

Publication 0160-5.18 - June 2003
Using 160-DN2 with DeviceNet Scanner 6-15
Configuring the Scanner
(Continued) Mapping the Output I/O
1. In the Scanner Module dialog box, click the Output tab. To
display this dialog box, right-click the scanner in the
configuration view (
Figure 6.9 ).
Figure 6.13
Output Page on the Scanner Module Dialog Box
If you selected the Automap on Add box in the Scanlist tab
(
Figure 6.10 ), RSNetWorx has already mapped the I/O. If it is not
mapped, click Automap to map it. If you need to change the
mapping, click Advanced and change the settings. Click Help for
assistance.
2. In the Memory box, select a location in scanner memory.
In our example, we are using a 1756-DNB scanner and selected
Assembly Data.
Scanner Memory Locations
1747-SDN Discrete or M-File
1756-DNB Assembly Data
1771-SDN Block Xfer 62 – 57