Rockwell Automation 442L SC300 Safety Sensor User Manual - Manual (Page 46)

44 Rockwell Automation Publication 10000202762 Ver 00 - January 2012
Chapter 9 Care and maintenance
Chapter
9
Care and maintenance
The SC300 safety camera system is maintenance-free in operation. The front screen on
the SC300 as well as the reflective tape should be cleaned regularly and also cleaned
immediately in case of soiling.
Do not use aggressive cleaning agents.
Do not use abrasive cleaning agents.
How to clean the front screen and the reflective tape:
Use a clean and soft brush to remove dust from the front screen and the reflective tape.
Then wipe the front screen and the reflective tape with a clean and damp cloth.
Note After cleaning, check the position of the camera and check the reflective tape for good
condition to ensure it is not possible to reach over, reach under or stand behind the
protective device.
Check the effectiveness of the protective device as described in “Test notes” on page 38.