Rockwell Automation 150 USE MN/SMC DIALOG + CONTROLLER - Manual (Page 108)

7-24 Options
Figure 7.20 Typical Wiring Diagram for the Slow Speed with Braking Option
with a Bypass Contactor
① Customer supplied.
② Refer to the controller nameplate to verify the rating of the control power input voltage.
Note: Refer to Chapter 3 for typical power circuits.
Brake ➀
Stop ➀
BC ➀
Control Power ➁
Slow Speed ➀
Start ➀
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
Internal
Auxiliary
Contacts
To
Bulletin 825
Converter
Module
Auxiliary contacts set
for Up-to-speed
Fanning Strip ➀
SMC Dialog Plus
Control Terminals