Rockwell Automation 1336T ControlNet Frn1.02 Rev 1.5 - Manual (Page 157)

6–15 Parameters
Publication 1336 FORCE–5.18 ––March, 1999
322 CntlNet Input 0
[CntlNet In 0]
CntlNet In 0 contains the first word or data group
from the PLC controller output image table. The
ControlNet scanner transfers the data to the drive
every rack scan. The ControlNet Adapter Board can
use this value directly. Other drive functions can use
this value through a configuration link.
Parameter Number 322
Parameter Type Read Only, Source
Display Units / Drive Units None
Factory Default None
Minimum Value –32767
Maximum Value +32767
File – Group Communications I/O – Channel A
323 CntlNet Input 1
[CntlNet In 1]
CntlNet In 1 contains the second word or data group
from the PLC controller output image table. The
ControlNet scanner transfers the data to the drive
every rack scan. The ControlNet Adapter Board can
use this value directly. Other drive functions can use
this value through a configuration link.
Parameter Number 323
Parameter Type Read Only, Source
Display Units / Drive Units None
Factory Default None
Minimum Value –32767
Maximum Value +32767
File – Group Communications I/O – Channel A
324 CntlNet Input 2
[CntlNet In 2]
CntlNet In 2 contains the third word or data group
from the PLC controller output image table. The
ControlNet scanner transfers the data to the drive
every rack scan. The ControlNet Adapter Board can
use this value directly. Other drive functions can use
this value through a configuration link.
Parameter Number 324
Parameter Type Read Only, Source
Display Units / Drive Units None
Factory Default None
Minimum Value –32767
Maximum Value +32767
File – Group Communications I/O – Channel A