Rockwell Automation 1336T ControlNet Frn1.02 Rev 1.5 User Manual

Page 158

Advertising
background image

6–16

Parameters

Publication 1336 FORCE–5.18 ––March, 1999

325

CntlNet Input 3

[CntlNet In 3]

CntlNet In 3 contains the fourth word or data group
from the PLC controller output image table. The
ControlNet scanner transfers the data to the drive
every rack scan. The ControlNet Adapter Board can
use this value directly. Other drive functions can use
this value through a configuration link.

Parameter Number

325

Parameter Type

Read Only, Source

Display Units / Drive Units

None

Factory Default

None

Minimum Value

–32767

Maximum Value

+32767

File – Group

Communications I/O – Channel A

326

CntlNet Input 4

[CntlNet In 4]

CntlNet In 4 contains the fifth word or data group
from the PLC controller output image table. The
ControlNet scanner transfers the data to the drive
every rack scan. The ControlNet Adapter Board can
use this value directly. Other drive functions can use
this value through a configuration link.

Parameter Number

326

Parameter Type

Read Only, Source

Display Units / Drive Units

None

Factory Default

None

Minimum Value

–32767

Maximum Value

+32767

File – Group

Communications I/O – Channel A

327

CntlNet Input 5

[CntlNet In 5]

CntlNet In 5 contains the sixth word or data group
from the PLC controller output image table. The
ControlNet scanner transfers the data to the drive
every rack scan. The ControlNet Adapter Board can
use this value directly. Other drive functions can use
this value through a configuration link.

Parameter Number

327

Parameter Type

Read Only, Source

Display Units / Drive Units

None

Factory Default

None

Minimum Value

–32767

Maximum Value

+32767

File – Group

Communications I/O – Channel A

Advertising