Rockwell Automation 1305 AC Drive, Series C, Firmware 6.xx and Up - Manual (Page 120)

Programming 5-52
Owners Group (continued)
[Reference Owner] Parameter # 106 [Reference Owner]
Parameter Type Read Only
This parameter displays which adapter has exclusive
control of selecting the [Freq Source]. Units Byte Settings 1
0
Controlling
Not Controlling
[Accel Owner] Parameter # 107 [Accel Owner]
Parameter Type Read Only
This parameter displays which adapter currently is
exclusively controlling the selection between
[Accel Time 1] and [Accel Time 2]. Units Byte Settings 1
0
Controlling
Not Controlling
[Decel Owner] Parameter # 108 [Decel Owner]
Parameter Type Read Only
This parameter displays which adapter currently is
exclusively controlling the selection between
[Decel Time 1] and [Decel Time 2]. Units Byte Settings 1
0
Controlling
Not Controlling
[Fault Owner] Parameter # 109 [Fault Owner]
Parameter Type Read Only
This parameter displays which adapters are currently
issuing a [Clear Faults] Command. Multiple adapters can
issue simultaneous [Clear Faults] Commands. Units Byte Settings 1
0
Controlling
Not Controlling