Rockwell Automation 1203-EN1 EtherNet/IP-to-SCANport Module User Manual
Page 103
Module Parameters
B-3
15
16
17
18
[IP Addr Act 1]
[IP Addr Act 2]
[IP Addr Act 3]
[IP Addr Act 4]
Displays the actual IP address being used by the
module.
Default:
0
Default:
0
Default:
0
Default:
0
Minimum:
0
Maximum:
255
Type: Read
Only
19
20
21
22
[Subnet Act 1]
[Subnet Act 2]
[Subnet Act 3]
[Subnet Act 4]
Displays the actual subnet mask being used by the
module.
Default:
0
Default:
0
Default:
0
Default:
0
Minimum:
0
Maximum:
255
Type: Read
Only
23
24
25
26
[Gateway Act 1]
[Gateway Act 2]
[Gateway Act 3]
[Gateway Act 4]
Displays the actual gateway address being used
by the module.
Default:
0
Default:
0
Default:
0
Default:
0
Minimum:
0
Maximum:
255
Type: Read
Only
27
[EN Rate Cfg]
Configures the network data rate at which the
module communicates. (Updates Parameter 28 -
[EN Rate Act] after reset.)
Default:
0 = Autodetect
Values
0 = Autodetect
1 = 10 Mbps Full
2 = 10 Mbps Half
3 = 100 Mbps Full
4 = 100 Mbps Half
Type:
Read/Write
Reset Required:
Yes
Parameter
No. Name and Description
Details
255 . 255 . 255 . 255
[IP Addr Act 1]
[IP Addr Act 2]
[IP Addr Act 3]
[IP Addr Act 4]
255 . 255 . 255 . 255
[Subnet Act 1]
[Subnet Act 2]
[Subnet Act 3]
[Subnet Act 4]
255 . 255 . 255 . 255
[Gateway Act 1]
[Gateway Act 2]
[Gateway Act 3]
[Gateway Act 4]