Rockwell Automation 1203-EN1 EtherNet/IP-to-SCANport Module - Manual (Page 139)

EtherNet/IP Objects C-29
Class Code
Instances
The module supports one instance of the TCP/IP Interface object.
Class Attributes
Instance Attributes
Ethernet Link Object
Hexadecimal Decimal
0xF6 246
Number Description
0 Class Attributes
1 Object Attributes
Attribute
ID Access
Rule
Name Data Type Description
1 Get Revision UINT The revision of this object
Attribute
ID Access
Rule
Name Data Type Description
1 Get Interface
Speed UDINT Speed in megabits per second (Mbs)
2 Get Interface
Flags DWORD Bit | Value
0 = Link status (0 = inactive, 1 = active)
1 = Duplex (0 = half duplex, 1 = full duplex)
2 to 31 = Reserved
3 Get Physical
Address USINT[6] MAC address (XX-XX-XX-XX-XX-XX)
The first octet (USINT[0]) is on the left.
4 Get Interface
Counters STRUCT
of:
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
Octets received
Unicast packets received
Non-unicast packets received
Inbound packets received but discarded
Inbound packets with errors (not discarded)
Inbound packets with unknown protocol
Octets sent
Unicast packets sent
Non-unicast packets sent
Outbound packets discarded
Outbound packets with errors