Rockwell Automation 1203-EN1 EtherNet/IP-to-SCANport Module - Manual (Page 125)

EtherNet/IP Objects C-15
The module supports the following PCCC command types:
See DF1 Protocol and Command Set Manual, Allen-Bradley Publication
No. 1770-6.5.16
.
N-Files
PCCC Object (Continued)
CMD FNC Description
0x06 0x03 Identify host and some status
0F 67 PLC-5 typed write
0F 68 PLC-5 typed read
0F 95 Encapsulate other protocol
0F A2 SLC 500 protected typed read with 3 address fields
0F AA SLC 500 protected typed write with 3 address fields
0F A1 SLC 500 protected typed read with 2 address fields
0F A9 SLC 500 protected typed write with 2 address fields
0F 00 Word range read
0F 01 Word range write
N-File Description
N10:0 Number of SCANport Product
(1)
Parameters
(1)
SCANport Product refers to a drive or other SCANport product connected to the
module.
N10:1 – N10:999
N11:0 – N11:999
N12:0 – N12:999 SCANport Product
(1)
Parameter Value Read/Write
(Parameters 1 – 2999)
N13:0 Number of 1203-EN1 Module Parameters
N13:1 – N13:999 1203-EN1 Module Parameter Value Read/Write
(Parameters 1 – 999)
N30:1 – N30:999
N31:0 – N31:999
N32:0 – N32:999 SCANport Product
(1)
Parameter Full/All Information Read
(Parameters 1 – 2999)
N33:1 – N33:999 1203-EN1 Module Full/All Information Read
(Parameters 1 – 999)