Rockwell Automation 1756-DHRIO ControlLogix Data Highway Plus-Remote I/O Communication Interface Module I.I. - Manual (Page 11)

ControlLogix Data Highway Plus-Remote I/O Communication Interface Module 11
Publication 1756-IN003D-EN-P - July 2008
Remove or Replace the Module (When Applicable)
1. Push on upper and lower module tabs to disengage them.
2. Slide the module out of the chassis.
If you are replacing an existing module with an identical one, and you want to
resume identical system operation, you must install the new module in the
same slot.
POWER
POWER
1
2
43237