Apply chassis power – Rockwell Automation 1756-DHRIO ControlLogix Data Highway Plus-Remote I/O Communication Interface Module I.I. User Manual
Page 13
Advertising
ControlLogix Data Highway Plus-Remote I/O Communication Interface Module 13
Publication
1756-IN003D-EN-P - July 2008
Connect the Programming Terminal and DH+ or Remote I/O Network
1. Connect the programming terminal to the 8-pin mini DIN connector.
2. Connect the DH+ or Remote I/O network to the channel A or B
connector as appropriate.
Apply Chassis Power
WARNING
For hazardous locations, use the following cable for the programming
terminal connection:
•
Supplier: Huan Yu
•
Part Number: GCMD08P050062000
POWER
POWER
1
2
43239
ON
POWER
OFF
ON
POWER
OFF
43240
Advertising