Configuring analog output modules, Configuring digital input modules – Rockwell Automation 1757-SWKIT5000 Getting Started with ProcessLogix R500.1 Quick Start User Manual
Page 13
Getting Started with ProcessLogix R500.1 13
Publication 1757-QS500A-EN-P - October 2002
Configuring Analog Output modules
To configure an analog output module:
1. Double-click the IOM named LabAO.
This brings up the window for the 6-channel isolated analog output module
(1756-OF6CI; current output, or 1756-OF6VI; voltage output).
2. On the IOM Configuration window, select the Main tab and enter the following
parameters:
3. Select the Channel Configuration tab and enter the following parameters for all
channels:
4. Click OK.
Configuring Digital Input Modules
To configure a digital input module:
1. Double-click the IOM with the name LabDI.
This brings up the window for the 16-channel, 24V DC isolated analog input module
(1756-IB16I).
in this field:
enter:
IOM Slot Number
the slot number containing this module
Remote I/O Chassis Mac Address
0
ControlNet Module Slot Number
0
in this field:
enter:
Shed to Safe Value
unchecked
Calibration Bias
0