Rockwell Automation 1757-SWKIT5000 Getting Started with ProcessLogix R500.1 Quick Start - Manual (Page 8)

8 Getting Started with ProcessLogix R500.1
Publication 1757-QS500A-EN-P - October 2002
2. In the Login dialog box, make these entries:
a. Enter >mngr< as the default User Name.
b. Enter the appropriate Password.
c. Enter the Server Name (e.g., plx1) in the Server Name field.
d. Enter Classic Server Security in the Domain Name field.
3. Click OK.
4. Control Builder starts up displaying the Project tab:
The available tabs are described in the following table:
Once you have opened Control Builder, you can begin configuring your hardware.
this tab: shows you:
Project the offline copy of your project
Monitoring the loaded or currently running copy of the application executing on the
1757-PLX52
Library • available I/O modules (IOM)
• available function blocks for use in Control Modules
• available function blocks for use in Sequential Control Modules
• available control component libraries (CCLs)