Configuring digital output modules – Rockwell Automation 1757-SWKIT5000 Getting Started with ProcessLogix R500.1 Quick Start User Manual
Page 14
14 Getting Started with ProcessLogix R500.1
Publication 1757-QS500A-EN-P - October 2002
2. On the IOM Configuration window, select the Main tab and enter the following
parameters:
3. Select the Module Configuration tab.
4. In the Filter Times fields, select 1MSDELAY for all channels.
5. Click OK.
Configuring Digital Output Modules
To configure a digital output module:
1. Double-click the IOM named LabDO.
This brings up the window for the 16-channel, 24V DC isolated discrete output
module (1756-OB16I).
2. On the IOM Configuration window, select the Main tab and enter the following
parameters:
3. Click OK.
in this field:
enter:
IOM Slot Number
the slot number containing this module
Remote I/O Chassis Mac Address
0
ControlNet Module Slot Number
0
in this field:
enter:
IOM Slot Number
the slot number containing this module
Remote I/O Chassis Mac Address
0
ControlNet Module Slot Number
0