Rockwell Automation 1757-SWKIT5000 Getting Started with ProcessLogix R500.1 Quick Start - Manual (Page 20)

20 Getting Started with ProcessLogix R500.1
Publication 1757-QS500A-EN-P - October 2002
Configuring Parameters
1. Double-click the NUMERIC block. You see the Numeric Parameters window.
2. Enter 10 in the Actual Value field and click OK.
3. Double-click the PID block. You see the PID Parameters window.
4. Click the Algorithm tab.
5. Enter these parameters:
6. Click OK.
7. Double-click the AICHANNEL block. You see the AICHANNEL Parameters
window.
8. Select LabAI from the pull-down list in the Module Name field.
9. Select Channel 0.
10. Click Assign Channel Block.
11. Click OK.
12. Double-click the AOCHANNEL block. You see the AOCHANNEL Parameters
window.
13. Select LabAO from the pull-down list in the Module Name field.
14. Select Channel 0.
15. Click Assign Channel Block.
16. Click OK.
in this field: enter:
T1 0.1
T1 High Limit 2
High Gain Limit 2
Overall Gain 0.5