Rockwell Automation 1757-SWKIT5000 Getting Started with ProcessLogix R500.1 Quick Start - Manual (Page 6)

6 Getting Started with ProcessLogix R500.1
Publication 1757-QS500A-EN-P - October 2002
Starting the ProcessLogix Server
To start the Server:
1. Click Start⇒Programs⇒ProcessLogix Server⇒Start-Stop ProcessLogix Server to
call up the ProcessLogix Server dialog box. Check that the Server is running.
OR
2. If the Server is running, close the dialog box. If the Server is not running:
a. With the Full Mode version of the dialog box active, click the System Running
option.
b. Click Yes to confirm the action and wait for the Server to change its state.
c. Close the ProcessLogix Server dialog box.
TIP
To display the “Full Mode” version of the ProcessLogix Server dialog
box, click the icon to the left of ProcessLogix in the title bar and click
Advanced
⇒
Full Mode. A checkmark will now appear in front of the
Full Mode selection to show that it is active.