Rockwell Automation 1757-SWKIT5000 Getting Started with ProcessLogix R500.1 Quick Start - Manual (Page 7)

Getting Started with ProcessLogix R500.1 7
Publication 1757-QS500A-EN-P - October 2002
Turning Off Areas
Areas are portions of a process you wish to control. This Quick Start assumes that Areas are
turned off. To turn off areas:
1. Click Start⇒Programs⇒ProcessLogix Server⇒Station.
2. Select Configure⇒Areas⇒Areas.
3. Access manager mode.
a. Click Oper in the bottom right of the screen.
b. In the Station Logon dialog box, type mngr.
c. Click OK.
Oper changes to Mngr.
4. To disable areas, uncheck the Areas Enabled check box.
5. Exit Station.
Starting Control Builder
Control Builder software is an application you use to develop Control Modules (CMs) and
Sequential Control Modules (SCMs). The CMs and SCMs are downloaded to the
1757-PLX52 Control Processor Module. CMs contain Function Blocks, and together with
SCMs you can tell the 1757-PLX52 how to control your process.
To start Control Builder:
1. Click Start⇒Programs⇒ProcessLogix Engineering Tools⇒Control Builder.
A Login Information window appears.