2 - set up the hardware, Prevent electrostatic discharge, Set up the hardware – Rockwell Automation 1785-Lx0C15 ControlNet PLC-5 Programmable Controllers Quick Start User Manual

Page 15: Chapter

Advertising
background image

Publication 1785-QS006C-EN-P - April 2002

Chapter

2

Set Up the Hardware

For more information, see the ControlNet PLC-5 Programmable
Controllers User Manual, publication number 1785-UM022.

Prevent Electrostatic Discharge

The PLC-5 processor is a modular component of the 1771-I/O system
that requires a properly installed system chassis. Refer to publication
1771-IN075 for detailed information on compatible chassis and
proper installation and grounding requirements. Limit maximum
adjacent slot power dissipation to 10W maximum.

ControlNet network

access cable

(1786-CP) or

serial cable

(1784-CP10)

PLC-5/20C

Processor

Internal

Power Supply

PC with

Programming

Software

I

nstall the hardware

(page 2-2)

Connect the personal computer to

the PLC-5 processor
(page 2-6

1

2

This equipment is sensitive to electrostatic discharge
which can cause internal damage and affect normal
operation. Follow these guidelines when you handle
this equipment:

•

touch a grounded object to discharge potential

static

•

wear an approved grounding wrist strap

•

do not touch connectors or pins on component

boards

•

do not touch circuit components inside the

equipment

•

if available, use a static-safe workstation

•

when not in use, store the equipment in appropriate

static-safe packaging

ATTENTION

!

Advertising