Rockwell Automation 1785-Lx0C15 ControlNet PLC-5 Programmable Controllers Quick Start User Manual
Page 30
Publication 1785-QS006C - April 2002
A-2
Memory Modules
3
• 1785-ME32
• 1785-ME64
• 1785-M100
Compatible I/O Modules
Bulletin 1771 I/O, 1794 I/O, 1746 I/O, and 1791 I/O
including 8-, 16-, 32-pt, and intelligent modules
Hardware Addressing
2-slot
• Any mix of 8-pt modules
• 16-pt modules must be I/O pairs
• No 32-pt modules
1-slot
• Any mix of 8- or 16-pt modules
• 32-pt modules must be I/O pairs
1/2-slot—Any mix of 8-,16-, or 32-pt modules
Communication Types and
Connectors and Cables
• Serial - using serial port connector (25-pin D-sub with screw
locks) and cable (Belden 8243 or equivalent)
• DH+ - using Phoenix contact connector (MSTB 2.5/3-ST) and
cable (1771-CD)
• DH using 1785-KA - using Phoenix Contact connector (MSTB
2.5/3-ST) and cable (1771-CD)
• Remote I/O - using Phoenix contact connector (MSTB 2.5/3-ST)
and cable (1771-CD)
• ControlNet - using ControlNet taps (1786-TPYS, 1786-TPS,
1786-TPR, 1786-TPYR)
• Programmng port - using Data Highway programming terminal
cable (1784-CP)
Wire Category 2
4
• Relay Cartridge
Wire Category 1
4
Location
1771-A1B, -A2B, A3B, -A3B1, -A4B chassis; left-most slot
Weight
PLC-5/20C15:
3 lbs, 3 oz (1.45 kg)
PLC-5/40C15:
3 lbs, 2 oz (1.42 kg)
PLC-5/46C15:
3 lbs, 2 oz (1.42 kg)
PLC-5/80C15:
3 lbs, 2 oz (1.42 kg)
Keying
• Between 40 and 42
• Between 54 and 56
Certifications
(when product is marked)
UL
UL Listed Industrial Control Equipment
CSA
CSA Certified Process Control Equipment
CSA
CSA Certified Process Control Equipment for Class I, Division 2 Group
A,B,C,D Hazardous Locations
CE
5
European Union 89/336/EEC EMC Directive, compliant with:
EN 50081-2; Industrial Emissions
EN 50082-2; Industrial Immunity
European Union 73/23/EEC LVD Directive, compliant with:
EN 61131-2; Programmable Controllers
C-Tick
5
Australian Radiocommunications Act, compliant with:
AS/NZS 2064; Industrial Emissions
1
The clock/calendar will update appropriately each year.
2
The 1785-CHBM cannot be used with the 1785-5/60C processor.
3
The 1785-ME16 cannot be used with ControlNet PLC-5 processors.
4
For more information, refer to publication 1770-4.1,
Industrial Automation Wiring and Grounding Guidelines.
5
See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates, and other certification details.