Rockwell Automation 1785-CHBM ControlNet PLC-5 Hot Backup System User Manual - Manual (Page 34)

Publication 1785-UM024B-EN-P - January 2003
3-8 Installing and Configuring Your ControlNet PLC-5 Backup System
Configure the Hot Backup Parameters
1. Launch RSLogix 5.
2. From the Comms menu, choose System Comms.
The Communications dialog appears:
3. Click on the odd-numbered node address of the first PLC-5.
4. Click the Online button to connect to the processor.
The Going to Online Programming State dialog appears:
5. Click on Upload Logic, Merge with Existing File’s
Comment/Symbol DB button to confirm that you wish to
complete the upload.
This step is required since you have made changes to the
ControlNet configuration.
6. From the File menu, choose Save to save the project.
7. Click on the Hot Backup icon under the Controller folder to
launch the Hot Backup Configuration utility.