Rockwell Automation 1769-L32C_L35CR CompactLogix Controller Installation Instructions - Manual (Page 36)

36 1769-L32C, 1769-L35CR CompactLogix Controller
Publication 1769-IN070C-EN-P - May 2008
Use a CompactFlash Card to Load Firmware
If you have an existing controller that is already configured and has firmware
loaded, you can store the current controller user program and firmware on
the CompactFlash card and use that card to update other controllers.
1. Use RSLogix 5000 software to store the controller user program and
firmware of a currently configured controller to the CompactFlash
card.
2. Click the Nonvolatile Memory tab of the Controller Properties dialog,
making sure to click Load Image On Powerup when you save to the
card.
3. Remove the card and insert it into a controller that you want to have
the same firmware and controller user program.
When you power up the second controller, the image stored on the
CompactFlash card is loaded into the controller.