Rockwell Automation 1769-L32C_L35CR CompactLogix Controller Installation Instructions - Manual (Page 37)

1769-L32C, 1769-L35CR CompactLogix Controller 37
Publication 1769-IN070C-EN-P - May 2008
Select the Controller Operating Mode
Use the keyswitch on the front panel of the controller to determine the
controller Operating mode.
Keyswitch Description
RUN
• Upload projects.
• Run the program and enable outputs.
• You cannot create or delete tasks, programs, or
routines. You cannot create or delete tags or edit
online while the keyswitch is in the RUN position.
• You cannot change the mode by using the
programming software while the keyswitch is in
the RUN position.
PROG • Disable outputs.
• Upload/download projects.
• Create, modify, and delete tasks, programs, or
routines.
• The controller does not execute (scan) tasks
while the keyswitch is in the PROG position.
• You cannot change the mode through the
programming software while the keyswitch is in
the PROG position.
REM • Upload/download projects.
• Change between Remote Program, Remote Test,
and Remote Run modes through the programming
software.