Rockwell Automation 1785-ENET PLC-5 Ethernet Interface Module Installation Instructions - Manual (Page 30)

30 PLC-5 Ethernet Interface Module
Publication 1785-IN019B-EN-P - January 2007
Interpret Error Codes
When the controller/interface module detects an error during the transfer of message data,
the controller sets the .ER bit and enters an error code that you can monitor from your
programming software.
Error Codes
Code
(Hexadecimal - word 1 of
the control block)
Description
(displayed on the data monitor screen)
0010 No IP address configured for the network
0011 Already at maximum number of connections
0012 Invalid internet address or host name
0013 No such host
0014 Cannot communicate with the name server
0015 Connection not completed before user-specified timeout
0016 Connection timed out by the network
0017 Connection refused by destination host
0018 Connection was broken
0019 Reply not received before user-specified timeout
001A No network buffer space available
0037 Message timed out in local controller
0083 Controller is disconnected
0089 Controller’s message buffer is full
0092 No response (regardless of station type)
00D3 Control block formatted incorrectly
00D5 Incorrect address for the local data table
0500 Message timed out waiting for a response from a client
1000 Illegal command specified in MSG instruction.
2000 Error communicating with a client
3000 Client session has disconnected
4000 Controller connected but faulted (hardware)
5000 Client generated an error converting data.
6000 Requested function is not available. Client’s unsolicited handler
returned an error.
7000 Controller is in Program mode
8000 Controller’s compatibility file does not exist
9000 Client’s backlog has been exceeded
B000 Controller is downloading so it is inaccessible
F001 Controller incorrectly converted the address