Rockwell Automation 1785-ENET PLC-5 Ethernet Interface Module Installation Instructions - Manual (Page 39)

PLC-5 Ethernet Interface Module 39
Publication 1785-IN019B-EN-P - January 2007
13. Click +A22.
You can change the radix display of N7:0 through N7:2.
14. Go back to the Custom Data Table Monitor page.
15. Click N:70 in the Address column to display the radix selection page.
16. Click the desired radix type radio button.
Follow these directions to see the Sample Extended Format page:
1. Go back to the Custom Data Table Monitor page.
2. Click + before the T4:0 in the Address column to display the Sample Extended
Format.
SNMP MIB II Data Groups
Simple Network Management Protocol (SNMP) specifies the diagnostic data that a host
computer must maintain for a network management software to access. Hosts typically keep:
• statistics on the status of their network interfaces.
• incoming and outgoing traffic.
• dropped datagrams.
• error messages.
Network management protocols let network management software access these statistics.
Management Information Base II is the SNMP standard for the management of network
data. The following tables list the MIB II data items and their descriptions.
MIB Data and Descriptions
Group MIB Description
System sysDescr Description of device
sysObjectID Identity of agent software
sysUpTime How long ago the agent started
sysName Device name
sysServices Services offered by the device