Rockwell Automation 1779-KP5_KP5R ORD.1779-5.3 - Manual (Page 16)

Installing the 1779ĆKP5 Module
Chapter 3
3Ć3
Figure 3.2 shows the mounting dimensions for the 1779-KP5 interface.
Figure 3.2
Mounting Dimensions
6.5 in.
(165 mm)
15.25 in.
(387 mm)
14.25 in.
(362 mm)
Use 0.25 in.
mounting bolts
(3 places)
3.8 in
(97 mm)
1.9 in.
(48mm)
16008
Clearance depth including cable connectors is 11 inches (280 mm).
Drill and tap the three holes in the enclosure back panel for mounting the
module. Insert the mounting bolt into the bottom hole. You can then hold
the interface in place, resting it on the bottom bolt, while you insert the
top mounting bolts.