Rockwell Automation 1779-KP5_KP5R ORD.1779-5.3 - Manual (Page 24)

Installing the 1779ĆKP5 Module
Chapter 3
3Ć11
CAUTION: Electrostatic discharge can degrade performance or
cause permanent damage to the module. To minimize or
prevent electrostatic discharge damage, handle the module at a
static-safe workstation.
If a static-safe workstation is not available, touch and remain in
contact with a grounded object to discharge yourself while
handling the module.
1. Make sure that you remove all power to the module. Usually, you
remove power to the 1779-KP5 by locking open the main disconnect
switch on your enclosure.
2. Loosen the four fasteners on the front panel of the module. Pull the
removable frame out to the switch-setting position. This exposes the
resistor.
Removable Frame
Jumper in upper
position terminates
Data Highway Plus
link.
R47
150
Ω
JPR2
16012