Rockwell Automation 1779-KP5_KP5R ORD.1779-5.3 - Manual (Page 47)

Addressing from Data Highway Plus
Chapter 5
5Ć5
Data Highway Plus to a SynchronousĆDevice Interface (1779ĆKFM, ĆKFMR)
The following example shows a PLC-5 message instruction (displayed by
the T50) that writes 100 words of data from the PLC-5, starting at
Memory Location N100:0. The command is a PLC-2-type command and
stores the data at Memory Offset 010 in the computer.
MESSAGE INSTRUCTION DATA ENTRY FOR CONTROL BLOCK N13:0
Read/Write: WRITE
PLC-5 Data Table Address:
Press a key to change a parameter or <RETURN> to accept parameters.
[
Program No Forces No Edits PLC-5/15 ADDR 20
READ/
WRITE
F1
PLC-5
ADDRESS
F2
SIZE IN
ELEMENTS
F3
LOCAL/
REMOTE
F4
REMOTE
STATION
F5
LINK
ID
F6
Remote Station:
Link ID:
Remote Link Type:
Size in Elements:
Local/Remote:
Local Node Address:
Processor Type:
Destination Data Table Address:
N100:0
100
REMOTE
Node = 012 User = 001
00
DATA HIGHWAY II
50
PLC-2
010
REMOTE
LINK
F7
LOCAL
NODE
F8
PROC.
TYPE
F9
DESTIN
ADDR
F10
BLOCK SIZE = 10 WORDS