Setting up your controllogix environment, Installing the factorytalk historian me module – Rockwell Automation FactoryTalk Historian ME 2.2 Quick Start Guide User Manual
Page 10
![background image](/manuals/579646/10/background.png)
F
ACTORY
T
ALK
H
ISTORIAN
ME Q
UICK
S
TART
G
UIDE
6
•
• •
RSLinx Classic
RSLogix 5000 Clock Update Tool
User Documentation
Setting up Your ControlLogix
Environment
Perform the following steps to set up your ControlLogix
environment before installing FactoryTalk Historian ME.
1.
Set up the ControlLogix chassis.
2.
Insert the ControlLogix controller(s) into the chassis.
3.
Power on the system.
4.
Configure the ControlLogix device(s).
Refer to your ControlLogix Chassis and ControlLogix Controller
documentation for more detailed information.
Installing the FactoryTalk Historian ME
Module
FactoryTalk Historian ME has two part numbers:
1756-HIST1G
1756-HIST2G
The 1G or 2G in the part number indicates how much data storage
is associated with the FactoryTalk Historian ME Module.
Unpack the FactoryTalk Historian ME Module and insert it into the
chassis.
Refer to your FactoryTalk Historian ME Installation Instructions for
more detailed information.