Rockwell Automation FactoryTalk Historian ME 2.2 Quick Start Guide - Manual (Page 43)

T
RANSFERRING
D
ATA
39
•
• •
2. Click [Search].
The following FT Historian Site Edition / PI Server Parameters
Information is displayed:
Point Source Select a point source from the drop-down
menu or use an asterisk (*) to search data
with all point sources.
Point Type Select a point type from the drop-down
menu or use an asterisk (*) to search data
with all point types.
Scan Rate Select a scan rate from the drop-down
menu or use an asterisk (*) to search data
with all scan rates.
Transfer Indicates whether or not data has been
transferred from FactoryTalk Historian ME
to FactoryTalk Historian SE or a PI server.
Select Yes from the drop-down menu to
search for data points that have already
been transferred or select No to search for
data points that have not been transferred.
Use an asterisk (*) to search for all data
points.
Property Name Property Description
FTHSE Licensed
Points (FactoryTalk
Historian SE) This is the total number of points that have
been granted based on the currently active
license for FactoryTalk Historian SE. See
Licensing in the FactoryTalk Historian ME
User’s Guide for more information.
Total Licensed
Points (PI server) This is the number of points that have been
assigned to the PI server. It is an indication
of the number of FactoryTalk Historian
ME points that can be transferred to the PI
server.
Property Name Property Description