Rockwell Automation FactoryTalk Historian ME 2.2 Quick Start Guide - Manual (Page 40)

F
ACTORY
T
ALK
H
ISTORIAN
ME Q
UICK
S
TART
G
UIDE
36
•
• •
2. Click on Data Transfer in the left-hand navigation bar. This
opens the Data Transfer page.
3. Under FT Historian Site Edition/ PI Server Parameters, enter
the host name or IP address of the FactoryTalk Historian SE
or PI server in the Host Server Name data field.
4. Click [Test Connection] to confirm that the specified host
server can be accessed.
If the connection is successful, the following information is
returned:
Property Name Property Description
Current Time This is the current time of the FactoryTalk
Historian SE or PI server. It is a read-only
property.
Time Offset This is the time difference between the
FactoryTalk Historian SE or PI server and
the time setting on FactoryTalk Historian
ME.
FTHSE Licensed
Points (FactoryTalk
Historian SE) This is the total number of points that have
been granted based on the currently active
license for FactoryTalk Historian SE. See
Licensing in the FactoryTalk Historian ME
User’s Guide for more information.