Rockwell Automation FactoryTalk Historian ME 2.2 Quick Start Guide - Manual (Page 34)

F
ACTORY
T
ALK
H
ISTORIAN
ME Q
UICK
S
TART
G
UIDE
30
•
• •
Open the FactoryTalk Historian ME web interface in your browser.
Click Configure Historian and go to the Data Transfer page.
To test the module’s connection to the FactoryTalk Historian SE
server where the web applications and data transfer trusts you just
created reside, perform the following steps.
1. Go to the FT Historian SE/PI Server Parameters section.
2. Enter the host name or IP address of your FactoryTalk
Historian SE server in the Host Server field.
If you use a host name, be sure that your network administrator
has already set up the relationship between the host name and
the IP address in the DNS server.
3. Click [Test Connection].