Rockwell Automation FactoryTalk Historian ME 2.2 Quick Start Guide - Manual (Page 30)

F
ACTORY
T
ALK
H
ISTORIAN
ME Q
UICK
S
TART
G
UIDE
26
•
• •
Assigning FT Activation Licenses to Support the
FTMS Point Source (FactoryTalk Historian SE)
Before adding trusts to FactoryTalk Historian SE, you must assign
activation licenses to support the FTMS point source in order to
successfully transfer data between FactoryTalk Historian ME and
FactoryTalk Historian SE. Activation licenses are assigned for
FactoryTalk Historian SE in the FactoryTalk Administration
Console (on the Client Tools CD shipped with your FactoryTalk
Historian ME module).
Application Trusts (FactoryTalk Historian SE)
To successfully transfer data between FactoryTalk Historian ME
and FactoryTalk Historian SE, you must create two application
trusts on the FactoryTalk Historian SE server: webs and
datatransfer. To do so, perform the following steps:
1. Launch the FactoryTalk Historian SE SMT application. From
the Windows Start menu run Programs > Rockwell Software >
FactoryTalk Historian SE > System Management Tools.
2. After SMT launches, go to the left-side System Management
pane and click [+] next to the [Security] item.
3. From the list of Security plug-ins, click the Trusts option.
4. From the Trust menu bar in the main window, select the drop-
down menu on the [New] option. The Wizard option is
checked by default.
5. The Add Trust Wizard window is launched. The Trust Wizard
will ask for various pieces of information to create a trust on